无线Mesh组网 |
您所在的位置:网站首页 › 无线mesh 无线桥接 › 无线Mesh组网 |
V7 无线瘦瘦桥接案例1 配置需求或说明1.1 适用产品系列 本手册适用产品及系列参考附录:设备适配表。 1.2 配置需求及实现的效果本案例实现WX2540H下联ap WA5320-C-EI与远端apWA5530做mesh链路,实现瘦瘦桥接,给终端提供Mesh-network的无线网路,为客户端分配192.168.2.0/24的地址。 该案例中AC为WX2540H,MPP为WA5320-C-EI负责连接无线Mesh网络和非Mesh网络,MAP为WA5530同时提供Mesh服务和接入服务。 2 组网图![]() # 创建一个编号为1的Mesh Profile。 system-view [AC] wlan mesh-profile 1 # 配置Mesh ID为1。 [AC-wlan-mesh-profile-1] mesh-id 1 # 配置认证模式为SAE。 [AC-wlan-mesh-profile-1] akm mode sae # 配置预共享密钥为12345678。 [AC-wlan-mesh-profile-1] preshared-key pass-phrase simple 12345678 # 开启Mesh Profile。 [AC-wlan-mesh-profile-1] mesh-profile enable [AC-wlan-mesh-profile-1] quit 3.2 配置无线服务模板 # 配置无线服务模板1,配置SSID为Mesh-network,并使能服务模板。 [AC] wlan service-template service1 [AC-wlan-st-s1] ssid Mesh-network [AC-wlan-st-1] service-template enable [AC-wlan-st-1] quit 3.3 配置MPP# 创建AP的模板,名称为mesh1,型号名称选择WA5320-C-EI,并配置AP的序列号为xxxxx。 [AC] wlan ap mesh1 model WA5320-C-EI [AC-wlan-ap-mesh1] serial-id xxxxx # 将Mesh Profile 1绑定到mesh1的Radio 1口。 [AC-wlan-ap-mesh1] radio 1 [AC-wlan-ap-mesh1-radio-1] mesh-profile 1 # 配置射频类型为dot11n(5GHz)。 [AC-wlan-ap-mesh1-radio-1] type dot11an # 配置射频工作信道为149。 [AC-wlan-ap-mesh1-radio-1] channel 149 # 开启Radio。 [AC-wlan-ap-mesh1-radio-1] radio enable [AC-wlan-ap-mesh1-radio-1] quit # 配置MPP停止发送邻居探测请求。 [AC-wlan-ap-mpp] portal-service enable [AC-wlan-ap-mpp] quit 3.4 配置MAP # 创建AP的模板,名称为mesh2,型号名称选择WA5530,并配置AP的序列号为xxxx。 [AC] wlan ap mesh2 model wa5530 [AC-wlan-ap-mesh2] serial-id xxxxx # 将Mesh Profile 1绑定到mesh2的Radio 1口。 [AC-wlan-ap-mesh2] radio 1 [AC-wlan-ap-mesh2-radio-1] mesh-profile 1 # 将无线服务模板service1绑定到mesh2的Radio 1口。 [AC-wlan-ap-mesh2-radio-1] service-template 1 vlan 3 # 配置射频类型为dot11n(5GHz)。 [AC-wlan-ap-mesh2-radio-1] type dot11an # 配置射频工作信道为149。 [AC-wlan-ap-mesh2-radio-1] channel 149 # 向MESH2的邻居白名单中添加MPP上Radio 1的MAC地址,使MESH2仅与MPP建立Mesh连接,以避免环路的产生。 [AC-wlan-ap-mesh2-radio-1] mesh peer-mac-address xxxx-xxxx-xxxx # 开启射频功能。 [AC-wlan-ap-mesh2-radio-1] radio enable [AC-wlan-ap-mesh2-radio-1] quit [AC-wlan-ap-mesh2] quit 3.5 结果验证在AC上查看上线AP,角色为MPP的mesh1,角色为MAP的mesh2两个AP均上线 dis wlan ap all Total number of APs: 2 Total number of connected APs: 2 Total number of connected manual APs: 2 Total number of connected auto APs: 0 Total number of connected common APs: 2 Total number of connected WTUs: 0 Total number of inside APs: 0 Maximum supported APs: 48 Remaining APs: 46 Total AP licenses: 16 Local AP licenses: 16 Server AP licenses: 0 Remaining Local AP licenses: 14 Sync AP licenses: 0
AP information State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad C = Config, DC = DataCheck, R = Run, M = Master, B = Backup
AP name APID State Model Serial ID mesh1 2 R/M WA5320-C-EI 219801Axxxx mesh2 3 R/M WA5530 219801Axxxx
dis wlan mesh-link ap //查看AC上的Mesh链路信息 AP name: mesh1 Peer Local Status RSSI Packets(Rx/Tx) 60da-838b-79a0 9c06-1bce-7fc0 Forwarding 73 1355/1343
AP name: mesh2 Peer Local Status RSSI Packets(Rx/Tx) 9c06-1bce-7fc0 60da-838b-79a0 Forwarding 76 1431/1374
dis wlan client //无线终端连接mesh2桥接AP并获取业务地址。 Total number of clients: 1
MAC address User name AP name R IP address VLAN a2ad-8c6f-20af N/A mesh2 2 192.168.2.1 3 |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |